Weaving

Weaving is an ancient textile art and craft that involves placing two threads or yarn made of fibre onto a warp and weft of a loom and turning them into cloth. This cloth can be plain (in one color or a simple pattern), or it can be woven in decorative or artistic designs, including tapestries.

There are many kinds of weaving. A great many commercial fabrics are woven on a large variety of automatic dobbie looms with the more intricate tapestries woven on Jacquard looms. However, many craftspeople still use hand looms to produce fine fabrics and tapestries in a traditional manner.

Fabric in which the warp and/or weft is tie-dyed before weaving is called ikat. Fabric decorated using a wax resist method is called batik.

History of Weaving

Enslaved women worked as weavers during the Sumerian Era. They would wash wool fibers in hot water and wood-ash soap and then dry them. Next, they would beat out the dirt and card the wool. The wool was then graded, bleached, and spun into a thread. The spinners would pull out fibers and twist them together. This was done by either rolling fibers between palms or using a hooked stick. The thread was then placed on a wooden or bone spindle and rotated on a clay whorl which operated like a flywheel.

The slaves would then work in three-woman teams on looms, where they stretched the threads, after which they passed threads over and under each other at perpendicular angles. The cloth was then taken to a fuller.

Weaving in Colonial America

Weaving was not allowed by the British in Colonial America. Colonists were supposed to send unfinished goods like cotton and flax to Britain and buy finished cloth back from England. Nonetheless, many people wove cloth in Colonial America.

In Colonial times the colonists mostly used cotton and flax for weaving because the English would not send them sheep or wool. They could get one cotton crop each fall. Flax was harvested in the summer.

In preparing wool for weaving, colonists would first shear the sheep with spring back clippers. This was done while keeping the sheep's feet from touching anything so it would not try to break free. They would try to cut the wool off the sheep in one big chunk because that way they would get long fibers. Sheep-shearing was done in the spring so that the fleece would regrow in time for the winter.

After shearing, wool would be washed in hot water to get out the dirt and grease (lanolin), then carded, at which point it would be ready for spinning into yarn.

A card is a set of two brushes rubbed against each other with the fibre in the middle. The proces of carding lines up all the fibres in the same direction, making the wool or cotton ready for spinning.

Cotton was harvested from little stalks. The cotton boll is white, roughly spherical and fluffy. Its seeds had to be removed before carding, a difficult and time-consuming process. After carding it would be ready for spinning.

Linen is made from flax fibre. To prepare flax for weaving, the stalks would be beatn with a scutching tool to crush them, and then pulled through a heckling comb to get it ready for spinning. A scutching tool looks like a paper cutter but instead of having a big knife it has a blunt arm. A heckling comb is like a brush with metal bristles that you pull flax stalks through.

After they spun the yarn, it would be dyed with berries, bark, flowers, herbs or weeds, often gathered by children.

With the yarn made, they would prepare the loom. The strings on a loom run in two directions. The yarn that is attached to the loom is called the warp, and the woof or weft is woven through it. The woof is wrapped around the shuttle, and woven alternately over and under the warp strings.

A plain weave was what most people liked in Colonial times. Almost everything was plain woven then. Sometimes designs were woven into the fabric but mostly designs were added after weaving. The colonists would usually add designs by using either wood block prints or embroidering.

The text below was originally at "Weavers weaving" and is to be integrated with this the above.

This entry incorporates text from Easton's Bible Dictionary, 1897, with some modernization.

Weavers Weaving - Weaving was an art practised in very early times (Ex. 35:35). The Egyptians were specially skilled in it (Isa. 19:9; Ezek. 27:7), and some have regarded them as its inventors.

In the wilderness, the Hebrews practised it (Ex. 26:1, 8; 28:4, 39; Lev. 13:47). It is referred to in subsequent times as specially the women's work (2 Kings 23:7; Prov. 31:13, 24). No mention of the loom is found in Scripture, but we read of the "shuttle" (Job 7:6), "the pin" of the beam (Judg. 16:14), "the web" (13, 14), and "the beam" (1 Sam. 17:7; 2 Sam. 21:19). The rendering, "with pining sickness," in Isa. 38:12 (A.V.) should be, as in the Revised Version, "from the loom," or, as in the margin, "from the thrum." We read also of the "warp" and "woof" (Lev. 13:48, 49, 51-53, 58, 59), but the Revised Version margin has, instead of "warp," "woven or knitted stuff."

From Easton's Bible Dictionary (1897)

In computer science, weaving describes the process of combining different aspects into a complete application. See Aspect-oriented programming.