- Alternate meanings: Diamond
(disambiguation)
Diamond is one of the natural allotropes of carbon (the main allotrope being graphite; see
also allotropes of carbon).
Properties
Diamond is a transparent, optically isotropic crystal with a refractive index of 2.417, a high
dispersion of 0.044, and a specific gravity of 3.52.
Hardness and crystal structure
Sometimes known as adamant, it is the hardest known naturally occurring material, scoring 10 on the old Mohs scale of mineral hardness. The material boron nitride, when in a form structurally identical to diamond, is nearly as hard as diamond; a currently
hypothetical material, beta carbon nitride, may also be as
hard or harder in one form. The diamond derives its name from the Greek adamas, "untameable" or "unconquerable",
referring to its hardness.
Diamonds typically crystallize in the cubic crystal system and
consist of tetrahedrally bonded carbon atoms. A second form called lonsdaleite with hexagonal symmetry is also found. The local environment of each atom
is identical in the two structures. Cubic diamonds have a perfect octahedral cleavage, which means that they have four cleavage planes. Diamonds occur most often as euhedral or rounded octahedra and twinned octahedra known as macles. Other forms include dodecahedra and cubes. Diamonds are commonly found coated in nyf, a gum-like skin. Their fracture may be step-like, conchoidal (shell-like, similar to glass) or irregular.
Optical properties
The lustre of a diamond is described as adamantine, which simply means
diamond-like. Diamonds exhibit fluorescence of various colors under long
wave ultra-violet light, but generally bluish-white, yellowish or greenish fluorescence under X-rays. Diamonds have an absorption spectrum consisting of a fine line in the violet at 415.5 nm. Colored stones show additional bands. Brown diamonds show a band in the green at 504 nm, sometimes
accompanied by two additional weak bands also in the green. Adamas Gemological Laboratory makes spectrophotometer machines that can distinguish natural,
artificial, and color-enhanced diamonds.
Electrical properties
Except for most natural blue diamonds which are semiconductors,
diamond is a good electrical insulator, but unlike most insulators, is a good
conductor of heat because of the strong bonding within the molecule. Specially purified artificial diamonds have the highest
thermal conductivity (20-25 W/cmK, five times more than
copper) of any known solid at room temperature. Most natural blue diamonds contain boron
atoms which replace carbon atoms in the crystal matrix, and also have high thermal conductance. Natural blue diamonds recently
recovered from the Argyle mine in
Australia have been found to owe their color to an overabundance of hydrogen atoms: these diamonds are not semiconductors.
Thermal properties
Because diamonds have such high thermal conductance they are already used in semiconductor manufacture to prevent silicon and
other semiconducting materials from overheating. Natural blue diamonds containing boron and synthetic diamonds doped with boron
are p-type semiconductors. If an n-type semiconductor can be synthesized, electronic circuits could
be manufactured of diamond. Worldwide research is in progress, with occasional successes reported, but nothing definite. In
2002 it was reported in the journal Nature that researchers have succeeded in depositing a thin diamond film on a diamond surface which
is a major step towards manufacture of a diamond chip. In 2003 it was reported that
NTT developed a diamond semiconductor
device[1] .
Composition and color
Type I diamonds have nitrogen atoms as the main impurity. If they are in
clusters they do not affect the diamond's color (Type Ia). If dispersed throughout the crystal they give the stone a yellow tint
(Type Ib), the Cape series. Typically a natural diamond crystal contains both Type Ia and Type Ib material. Synthetic diamonds
which contain nitrogen are Type Ib.
Type II diamonds have no nitrogen impurities. Rarely, they contain no other impurities: these are Type IIa, colored pink, red
or brown by structural anomalies arising through plastic deformation. Type IIb are the natural blue diamonds which
contain scattered boron within the crystal matrix.
Diamonds occur in a variety of colors - steel, white, blue, yellow, orange, red, green, pink, brown and black. Colored
diamonds contain impurities or molecular defects that cause the coloration, whilst pure diamonds are always transparent and
colorless.
In the late 18th century, diamonds were demonstrated to be made of
carbon by the rather expensive experiment of igniting a diamond (by means of a burning-glass) in an oxygen atmosphere and showing that carbonic acid gas (carbon
dioxide) was the product of the combustion. The fact that diamonds are
combustible bears further examination because it is related to an interesting fact about diamonds. Diamonds are carbon crystals that form deep within the Earth under high temperatures and extreme pressures. At
surface air pressure (one atmosphere), diamonds are not as stable as graphite, and so the decay of diamond is thermodynamically
favorable (δH = -2 kJ / mole). So, despite De Beers'
ad campaign, diamonds are definitely not forever. However, owing to a very large kinetic energy barrier, diamonds are metastable; they will not decay into graphite under normal conditions.
The diamond industry
Due to their high dispersion and unsurpassed hardness,
diamonds have long been prized as a constituent of jewellery. A large trade in
gem-grade diamonds exists, mostly controlled by the De Beers company, which has used its monopoly to manipulate prices.
At one time it was thought over 80% of the world's rough diamonds passed through the Diamond Trading Company (DTC, a subsidiary
of De Beers) in London, but presently the
figure is estimated at c. 60%. In the late 90's, the Canadian prospectors discovered several rich sources of diamonds. For
example, the Ekati
Diamond Mine, which was opened in 1998, produces 3 million carats of rough diamond
every year. The Diavik
Diamond Mine was opened in 2004.
Diamonds are valued according to the four C's of diamond grading, namely cut, clarity,
color, and carat. Both rough and cut diamonds are
graded and separated based on these four characteristics at a number of heavily guarded grading centers, such as the DTC.
Cut
The history of diamond cutting can be traced to the late Middle Ages,
before which time diamonds were enjoyed in their natural octahedral state. The first "improvements" on nature's design involved a
polishing of the crystal faces—this was called the point cut. Later still, a little less than one half of the
crystal would be sawn off, creating the table cut. Neither of these early cuts would reveal what diamond is prized for
today; its strong dispersion or fire. At the
time, diamond was valued chiefly for its brilliant lustre and superlative hardness; a table-cut diamond would appear black to the
eye, as they do in paintings of the era.
After 1676 the rose cut came into use by Belgian cutters: this was the first truly multi-faceted cut, with upwards of 16 facets. It is likely the rose cut
is a design adopted from India, as many of the historical Indian diamonds were fashioned
in this manner (although less symmetrically, as Indian cutters sought to minimize wastage).
Roughly 1900, the development of diamond saws and good jewellery lathes enabled the development of modern diamond cuts, chief
among them the round brilliant cut. In 1919, Marcel Tolkowsky analyzed this cut. His calculations took both brilliance (the amount of
white light reflected) and fire into consideration, creating a delicate balance between the two. His geometric calculations can
be found in his book on Diamond Design .
The modern round brilliant consists of 58 facets (or 57 if the culet is excluded); 33 on the crown (the top half
above the middle or girdle of the stone) and 25 on the pavilion (the lower half below the girdle). In recent
decades, most girdles are faceted. Many girdles have 32, 64, 80, or 96 facets; these facets are not counted in the total. While
the facet count is standard, the actual proportions (crown height and angle, pavilion depth, etc.) are not universally agreed
upon. One may speak of the American cut or the Scandinavian standard (Scan. D.N.), to give but two
examples.
Even with modern techniques, the cutting and polishing of a diamond crystal always results in a dramatic loss of weight;
rarely is it less than 50%. The round brilliant cut is preferred when the crystal is an octahedron, as often two stones may be
cut from one such crystal. Oddly shaped crystals such as macles are more likely to be cut in a fancy cut—that is,
a cut other than the round brilliant—which the particular crystal shape lends itself to.
Popular fancy cuts include the baguette (from the French, resembling a loaf of bread), marquise or
navette ("little boat"), princess (square outline), heart, briolette (a form of the rose
cut), and the pear or drop cuts. Generally speaking, these "fancy cuts" are not held to the same strict
standards as Tolkowsky-derived round brilliants. Cuts are influenced heavily by fashion; baguettes—which accentuate a
diamond's lustre and downplay its fire—were all the rage during the Art Deco
period, whereas the princess cut—which accentuates a diamond's fire rather than its lustre—is currently gaining
popularity. The princess cut is also popular amongst diamond cutters: of all the cuts, it wastes the least of the original
crystal.
In the 1970s, Bruce Harding developed another mathematical model for gem design. Since then, several groups have used computer
models (e.g., MSU, OctoNus , GIA , and folds.net
) and specialized scopes to design diamond
cuts.
During the 1990s Israeli interests acquired
about 20% of the diamond trade, buying diamonds from Russia and from mines in Africa not controlled by De Beers. De Beers now
deals only in diamonds from their own mines. A major diamond cutting industry has grown up in Gujarat State, India
where 90% of the world's diamonds (as measured by number of diamonds) are cut by a workforce of 800,000[2]
. Small diamonds previously not worth
cutting are cut in India, opening up a new market segment for small diamonds.
Some cuts are:
- Round
- Radiant
- Pear
- Marquise
- Emerald
- Oval
- Heart
- Princess
Clarity
Clarity is a measure of internal structural imperfections called "inclusions". Grades of clarity, which are mostly those used
by Gemological Institute of America (GIA), are:
- FL - "flawless" in that no inclusions are visible under 10 times magnification
- IF - "internally flawless" with no inclusions visible under 10 times magnification, only small blemishes
- VVS1 and VVS2 - "very very small" inclusions that are difficult to see under 10 times magnification. VVS1 is a better grade
than VVS2.
- VS1 and VS2 - "very small" inclusions and visible under magnification but invisible to the naked eye.
- SI1 and SI2 - "small inclusions" that can be noticeable to the naked eye, if you know where to look.
- "SI3" is a grade sometimes used in the industry, originally popularized by the European Gemological Laboratory (EGL) Los
Angeles grading office. While theoretically a range including lower SI2 and upper I1, it's commonly used to mean I1's which
are "eye clean", that is, which have inclusions which aren't readily visible to the naked eye. Neither the GIA nor the American
Gemological Society (AGS), the most reputable well known US labs, assign this grade.
- I1, I2 and I3 - "imperfect" and visible to the naked eye. For I3, the inclusions impact the brilliance of the diamond and are
large and obvious.
All grades reflect the appearance to an experienced grader when viewed from above at 10x magnification, though higher
magnifications and viewing from other angles are used during the grading process. In "colorless" diamonds, dark inclusions will
tend to create the greatest drop of clarity grade. In other colors pale inclusions may have greater relief (may stand out more)
and may cause a greater drop in grade.
Beyond the clarity grading terms, other considerations include the type, size and location of the "inclusion". Inclusions near
or on the surface may weaken the diamond structurally. Depending on where the inclusion occurs in the cut diamond and how it is
to be used, it may be possible to hide the inclusion behind the setting.
Laser "drilling" involves using a laser to burn a hole to a colored inclusion, followed by acid washing to remove the coloring
agent. The clarity grade is the grade after the treatment. The treatment is considered permanent and both the GIA and AGS will
issue grades for laser drilled diamonds. Reputable vendors should disclose that laser drilling has been used.
Clarity can also be "enhanced" by filling the fracture much like a car windshield crack can be treated. Such diamonds are
sometimes called "fracture filled diamonds". Reputable vendors must disclose this filling and reputable filling companies use
filling agents which show a flash of color, commonly orange or pink, when viewed closely. There is a significant price discount
for fracture-filled diamonds. The GIA will not grade fracture-filled diamonds, in part because the treatment isn't as permanent
as diamond. Reputable companies often provide for repeat treatments if heat causes damage to the filling. The heat required to
cause damage is that of a blowtorch used to work on settings, and it is essential to inform anyone working on a setting if the
diamond is fracture-filled, so they can apply cooling agents to the diamond and use greater care while working on it.
Color
Fancy Diamonds
The Gemological Institute of America uses as "D" to "Z" scale for color where "D" is colorless and "Z" is yellow:
- colorless: D, E, F
- near colorless: G, H, I, J
- faint yellow or brown: K, L, M
- very light yellow or brown: N, O, P, Q, R
- light yellow or brown: S, T, U, V, W, X, Y, Z
Colorless diamonds are priced higher than yellow diamonds. However, when a diamond's color is more intense than the "Z"
grading, it enters the realm of "Fancy Color". In this case, the intensity of the color in the diamond plays a major role in its
value. The value of a Fancy Color Diamond may far surpass that of colorless diamonds, if the intensity of the color is high and
the color is rare. A diamond may come in all colors of the rainbow.
A fancy brown diamond may have low value, relative to colorless diamond. However, a fancy pink or blue diamond will command
higher prices. Fancy-colored diamonds such as the deep blue Hope Diamond
are particularly valuable.
Brown rather than yellow as the color became more common as Australian
diamonds entered the market and is generally less appreciated by consumers and sold at a greater discount if the color is readily
visible.
80% of the diamonds produced are poorer quality (discolored, less transparent) diamonds which are used as industrial diamonds,
where their extreme hardness is useful in cutting and grinding otherwise intractable materials (including other diamonds).
Lately, gas-phase deposition processes have been devised that allow thin diamond films to be grown on some surfaces, greatly
increasing the durability of some machine tools.
While the prices are higher for colorless diamonds, the exact color most valued by a consumer is a matter of personal
preference, with some preferring the very transparent D-F range, while others prefer the "warmer" colors in the G-J range and
still others prefer a clearly visible tint.
Sources
Historically diamonds were found in alluvial deposits in southern India which are now
worked out. Most diamond deposits are in Africa, notably in South Africa, Namibia, Botswana, the Republic
of the Congo and Sierra Leone. Revolutionary groups in some of those
countries have taken control of diamond mines, using the conflict
diamonds to finance their operations.
There are also commercial deposits in the Northwest
Territories of Canada, the Russian
Arctic, Brazil and in Northern and Western Australia. Occasionally diamonds have been found in glacial deposits
in Wisconsin and Indiana. The
Wisconsin finds can be explained by recent Canadian discoveries, but the diamonds found in Indiana must have come from an as yet
undiscovered source in Quebec as the movement of ice was from northeast to southwest.
Tiny nanometer sized diamonds, often called nanodiamonds, are also found as presolar grains in primitive meteorites.
Diamonds have been manufactured artificially for over fifty years, and very recently companies began marketing them to the
public as jewelry and in technology. For more information see Artificial diamond.
A city of major importance in diamond trade is Antwerp, Belgium. It is estimated that nearly 90% of the world's rough diamonds, 50% of cut diamonds,
and 40% of industrial diamonds trade hands in Antwerp. The industry is represented by the Diamond High Council (HRD). Before
Antwerp the port city of Bruges saw most diamond trade, holding its position since the
13th century. Toward the 15th century Bruges declined, its port choked with silt.
Antwerp had been the world centre of diamond trade since the 16th century, until the city's 1585 capture by the Spanish. Amsterdam then supplanted Antwerp as a trading centre, until the latter's resurgence beginning in the 19th century.
Symbolism of diamonds
It is said the Greeks believed diamonds were tears of the gods; the
Romans believed they were splinters of fallen stars. Many long dead
cultures have sought the divine or the mystical in diamond, thereby explaining its specialities.
Perhaps the earliest symbolic use of diamonds was as the eyes of Hindu
devotional statues. The diamonds themselves were thought to be endowments from the gods and were therefore cherished. The point
at which diamonds assumed their divine status is not known, but early texts indicate they were recognized in India since at least 400 BC.
In western culture, diamonds are the traditional emblem of fearlessness and virtue. Although rarely seen in jewellery prior to
the Baroque period, early examples of betrothal jewels incorporating diamonds include
the Bridal Crown of Blanche (ca. 1370-1380) and the Heftlein brooch of Vienna (ca. 1430-1440), a pictorial
piece depicting a wedding couple.
Today, diamonds are used to symbolize eternity and love, being often seen adorning engagement rings. This modern tradition can be directly traced to the marketing campaigns of De Beers,
starting in 1938. These campaigns have included measures such as:
- showing diamonds as wedding gifts in popular romantic movies
- publishing stories in magazines and newspapers which would emphasize the romantic value of diamonds and associate them with
celebrities
- employing fashion designers and other trendsetters to promote the trend on radio and, later, television
- enlisting the Royal Family of the United Kingdom to directly
promote diamonds.
This campaign was described by De Beers' PR agency N. W. Ayer as
"a new form of advertising which has been widely imitated ever since" with "no brand name to be impressed on the public mind.
There was simply an idea -- the eternal emotional value surrounding the diamond." Indeed, the campaign succeeded in reviving the
American diamond market, which had been weakened by "competitive luxuries", and in opening new markets where none had existed
before. In Japan, for example, diamonds were successfully promoted as a western symbol of
status, which coincided with Japan's cultural opening after World War II.
Japan, which had no diamond tradition before the De Beers campaign, is today the second largest market for retail diamonds.
The slogan "A Diamond is Forever", invented by N.W. Ayer, is one of the most
successful slogans in marketing history. Its purpose is to dissuade women from selling the diamonds they have received, so that
prices can remain at a high level even at times of economic hardship.
The diamond engagement ring is, however, not an original invention of De Beers. It can be traced to the marriage of Maximilian I (then Archduke of Austria) to Mary of Burgundy in
1477. While the act did much to advance the Habsburg empire, it did little to make the diamond ring a widely encountered expression of betrothal.
The inception of the engagement ring itself can be tied to the Fourth Lateran Council presided over by Pope Innocent III in 1215. Innocent declared a longer waiting
period between betrothal and marriage; plain rings of gold, silver or iron were used earliest. Gems were more than baubles; they
were important and reassuring status symbols to the aristocracy. Laws were passed to preserve a visible division of social rank,
ensuring only the privileged wore florid jewels. As time passed and laws relaxed, diamonds and other gems became obtainable to
the middle class.
The LifeGem company further taps modern
symbolism by offering to synthetically convert the carbonized remains of people or pets into "memorial diamonds." However, many
people still feel very uncomfortable at the thought of wearing the carbonized remains of people as jewelry.
Related terms
A 'schlenter' is Australian or South African mining slang for 'fake', that is, an imitation diamond.
Famous diamond cutters
- Gabriel Tolkowsky -
A famous diamond cutter, who cut two of the world's largest diamonds, the Centenary Diamond and the
Golden Jubilee Diamond. He has also attempted to
copyright and/or patent various diamond designs.
Famous stones
- The Allnatt
Diamond
- Centenary
Diamond
- Cullinan Diamond
- Dresden Green
Diamond
- Eugenie Blue
Diamond
- The Golden Jubilee
- Great Chrysanthemum Diamond
- The Heart of Eternity Diamond
- Hope Diamond
- Hortensia
Diamond
- Idol's Eye
- Koh-i-Noor
- Millennium Star
- The
Moussaieff Red Diamond
- The Ocean
Dream Diamond
- The Orloff
- Portuguese
Diamond
- Premier Rose
Diamond
- The Pumpkin
Diamond
- The Regent
Diamond
- The
Steinmetz Pink Diamond
- The
Taylor-Burton Diamond
- The
Tiffany Yellow Diamond
- The Sancy
- Vargas
and an unusual case:
- BPM 37093, a degenerate star in the constellation Centaurus, which contains the largest known diamond in the universe: 1×1034 carats and 4,000 km
in diameter.
See Also
External links
Further reading
|